Free Shipping On All Orders Over $150

Common Causes of Dental Handpiece Failure and How to Avoid Them

Common Causes of Dental Handpiece Failure and How to Avoid Them: 

Dental handpiece failure is a common occurrence in dental practices. Following these steps to avoid them, can lengthen the lifespan of your dental handpieces. Dental handpieces are an essential tool for dentists and dental hygienists. They are used to perform a variety of dental procedures, including drilling, polishing, and shaping teeth. However, like any mechanical tool, dental handpieces can fail, leading to costly repairs and downtime. In this blog post, we will discuss the common causes of dental handpiece failure and how to avoid them.

Common Causes of Dental Handpiece Failure and How to Avoid Them

The Common Causes of Dental Handpiece Failure and How to Avoid them:

Lack of Maintenance

One of the most common causes of handpiece failure is a lack of maintenance. Dental handpieces require regular cleaning and lubrication to keep them in good working condition. Failure to perform regular maintenance can cause dirt and debris to build up inside the handpiece, leading to reduced performance, increased noise, and failure.

How to Avoid

To avoid this, it is essential to follow the manufacturer’s recommended maintenance schedule. This will typically involve cleaning the handpiece after each use, lubricating it regularly, and replacing worn or damaged parts as needed.

 

Improper Handling

Dental handpieces are delicate instruments that require proper handling to prevent damage. Mishandling the handpiece can lead to bent or broken shafts, damaged turbines, and other problems that can cause the handpiece to fail.

How to Avoid

To avoid this, it is important to train staff on proper handling techniques. This should include how to hold the handpiece, how to change and dispose of burs properly, and how to store the handpiece when not in use.

Overuse

Another common cause of dental handpiece failure is overuse. Using the handpiece for extended periods or performing heavy-duty procedures can cause the handpiece to overheat and damage its internal components.

 

How to Avoid

To avoid this, it is important to use the handpiece only for its intended purpose and to follow the manufacturer’s recommended usage guidelines. It is also a good idea to invest in multiple handpieces to distribute the workload and avoid overuse of a single handpiece.

Poor Water Quality

Water is an essential component of dental handpiece function, as it cools the handpiece and removes debris during use. However, poor water quality can cause the handpiece to fail prematurely. Water that contains high levels of minerals, bacteria, or other contaminants can cause corrosion, blockages, and other problems can lead to handpiece failure.

 

How to Avoid

To avoid this, it is important to use high-quality water that meets or exceeds the manufacturer’s recommended specifications. It is also essential to regularly flush and clean the waterlines to prevent the buildup of bacteria and other contaminants.

 

Wear and Tear

Dental handpieces are subject to wear and tear over time, just like any mechanical tool. Over time, the handpiece’s internal components, such as the turbine, bearings, and gears, can wear out, causing reduced performance and eventual failure.

 

How to Avoid

To avoid this, it is important to replace worn or damaged parts promptly and to follow the manufacturer’s recommended replacement schedule. It is also a good idea to invest in high-quality handpieces that are designed for durability and longevity.

Dental handpieces are essential tools for dental professionals, but they require proper maintenance and handling to avoid failure. By following the manufacturer’s recommended maintenance and usage guidelines, investing in high-quality handpieces, and properly handling and storing the handpiece, dental professionals can extend the life of their handpieces and avoid costly repairs and downtime. dental handpiece failure can cause significant problems for dental professionals during dental procedures. Dental professionals should ensure that they properly maintain and use their handpieces, and be aware of the common causes of handpiece failure. Regular maintenance and servicing can extend the life of the handpiece and reduce the risk of failure.

 

5 Disadvantages of House Brand Handpieces

There are 5 Disadvantages of House Brand Handpieces. House brand handpieces, also known as generic handpieces, or Chinese handpieces are handpieces that are manufactured by a third party and sold under a different brand name. These handpieces are often less expensive than branded handpieces, and some dental practices prefer them for cost-saving reasons. However, there are several disadvantages to using house-brand handpieces that dental professionals should be aware of before making a purchasing decision. Here are 5 Disadvantages of House Brand Handpieces:

What is a House Brand Handpiece?

A house brand (Chinese) handpiece refers to a dental handpiece that is manufactured by a Chinese company and sold under a private label or “house” brand name. These handpieces are typically cheaper than brand-name handpieces and are often marketed to dental practices as a more affordable alternative.House brand handpieces are usually made in China, where the cost of labor and materials is lower than in other countries. As a result, these handpieces are often sold at a lower price point than brand-name handpieces. However, the quality and performance of these handpieces may not be as consistent as brand-name handpieces, and they may require more frequent repairs or replacements.

 

The 5 Disadvantages of House Brand Handpieces:

1. Lower Quality

One of the main disadvantages of house brand handpieces is their lower quality compared to branded handpieces. House-brand handpieces are often made with lower-quality materials and components, which can result in lower durability and reliability. As a result, they may have a shorter lifespan and require more frequent repairs or replacements, which can ultimately end up costing more in the long run. House-brand handpieces are usually made in third-world countries with lower quality standards. As a result, the quality of these handpieces may not be up to par with brand-name handpieces.

5 Disadvantages of House Brand Handpieces

2. Limited Warranties

Most branded handpieces come with a manufacturer warranty that covers defects and malfunctions for a specified period. However, house-brand handpieces often have limited or no warranty, which can be a significant disadvantage for dental practices. In the absence of a warranty, dental professionals may have to incur the costs of repairing or replacing the handpiece themselves

5 Disadvantages of House Brand Handpieces

3. Inconsistent Performance

Another disadvantage of house brand handpieces is their inconsistent performance. Since they are manufactured by different third-party manufacturers, the quality and performance of each handpiece may vary. Dental professionals may experience inconsistencies in speed, torque, noise level, and overall performance, which can affect their ability to perform procedures effectively and efficiently.

5 Disadvantages of House Brand Handpieces

4. Poor Customer Support

Most branded handpieces come with a dedicated customer support team that can provide assistance and guidance in case of issues or questions. However, house brand handpieces often lack this kind of customer support, leaving dental professionals without a reliable source of assistance if something goes wrong.

5 Disadvantages of House Brand Handpieces

5. Limited Compatibility

House-brand handpieces may not be compatible with other dental equipment, such as couplings and turbines. This can limit their use and make it difficult to switch between different handpieces during procedures. In contrast, brand-name handpieces are designed to be compatible with other dental equipment, making them more versatile and convenient to use.

5 Disadvantages of House Brand Handpieces

Dental Electric Handpieces

Dental electric handpieces are a crucial tool in the dental industry. They are used for a variety of dental procedures, including cavity preparation, crown and bridge removal, and tooth restoration. These handpieces are designed to make dental procedures easier, faster, and more efficient. In this blog, we’ll take a closer look at these handpieces, how they work, their benefits, and why they are an essential tool for dentists.

How Dental Electric Handpieces Work:

These handpieces are powered by a motor, which is typically located in the base of the handpiece. The motor spins a small, disposable bur or bit that is used to remove tooth material. The bur or bit is attached to the handpiece via a chuck or collet that holds it in place. The speed and torque of the handpiece can be controlled by the dentist, allowing for greater precision during procedures.

Benefits of Electric Handpieces:

There are several benefits to using electric handpieces over traditional air-driven handpieces. For starters, these handpieces are typically faster and more efficient than air-driven handpieces. They are also quieter, which can make dental procedures more comfortable for patients. These handpieces generate less heat, which can reduce the risk of tooth damage and make procedures less painful. They are also more ergonomic, which can reduce hand fatigue and strain for the dentist.

These handpieces are also more versatile than air-driven handpieces. They can be used for a wider range of procedures, including endodontic procedures and implant placement. They are also better suited for working with hard materials, such as metal or ceramic, which can be difficult to cut with air-driven handpieces.

Finally, these handpieces are more environmentally friendly than air-driven handpieces. Air-driven handpieces require a constant supply of compressed air, which can be costly and environmentally harmful. These handpieces, on the other hand, require only electricity to operate, which is readily available and less harmful to the environment.

Types of Dental Electric Handpieces

Highspeed Handpieces

Dental Electric Handpieces

These handpieces are designed for cutting tooth material quickly and efficiently. They typically spin at speeds between 200,000 and 400,000 RPM and are used for procedures such as cavity preparation and crown and bridge removal.

 

Lowspeed Handpieces

Dental Electric Handpieces

These handpieces are designed for polishing and finishing procedures. They typically spin at speeds between 5,000 and 40,000 RPM and are used for procedures such as prophylaxis and orthodontic bracket placement.

 

Surgical Handpieces

These handpieces are designed for oral surgery procedures, such as extraction and implant placement. They typically have higher torque and lower speed than high-speed handpieces and are better suited for cutting hard materials.

 

Choosing the Right Electric Handpiece

Choosing the right handpiece depends on the procedure being performed. High-speed handpieces are ideal for cutting tooth material quickly and efficiently, while low-speed handpieces are better suited for polishing and finishing procedures. Surgical handpieces are designed for oral surgery procedures and are better suited for cutting hard materials such as bone.

Other factors to consider when choosing a handpiece include speed, torque, and ergonomics. It’s important to choose a handpiece that is comfortable to hold and use for extended periods of time. Handpieces with adjustable speed and torque settings can be helpful for achieving greater precision during procedures.

Pros vs Cons of Electric Handpieces

Pros

1. Consistent and Precise Speed: Electric handpieces offer a consistent and precise speed, which is not possible with traditional dental drills. This is because the electric motor generates a constant speed, regardless of the pressure applied to the handpiece. This allows for more precise cutting and reduces the risk of damage to healthy tooth structure.

2. Wider Range of Speed Options: Electric handpieces offer a wider range of speed options, which allows dental professionals to choose the best speed for a particular procedure. This range of speed options is not possible with traditional dental drills.

3. Less Noise and Vibration: Electric handpieces generate less noise and vibration than traditional dental drills, which improves the patient’s comfort level during the procedure.

4. More Efficient: Electric handpieces are more efficient than traditional dental drills, which means that they require less time to complete a procedure. This reduces the amount of time that the patient spends in the dental chair, and also increases the number of procedures that can be completed in a day.

Cons

1. Cost: Electric handpieces are more expensive than traditional dental drills, which can be a barrier to adoption for some dental practices.

2. Maintenance: Electric handpieces require more maintenance than traditional dental drills, which can be time-consuming and costly.

3. Heat Generation: Electric handpieces generate more heat than traditional dental drills, which can cause discomfort for the patient and damage to the tooth structure.

4. Limited Range of Motion: Electric handpieces have a limited range of motion, which can make it difficult to reach certain areas of the mouth.

Electric handpieces are becoming the preferred choice for many dental professionals due to their consistent and precise speed, wider range of speed options, lighter and more ergonomic design, and improved efficiency. Although electric handpieces are more expensive and require more maintenance than traditional dental drills, the benefits outweigh the disadvantages. As technology continues to advance, it is likely that electric handpieces will become even more sophisticated and user-friendly, further cementing their place as the future of dental drilling.

 

Dental Lowspeed Handpieces

Dental Lowspeed Handpieces are a critical component of any dental practice. These handpieces are used for a wide variety of tasks, from polishing and finishing restorations to removing caries and preparing teeth for procedures. Lowspeed handpieces are available in a range of sizes, shapes, and designs, and they can be powered by compressed air, electricity, or a combination of both. 

Types of Lowspeed Handpieces:

There are several types of lowspeed handpieces available, each with its own unique features and benefits. The most common types of lowspeed handpieces include straight, contra-angle, and prophy handpieces.

Straight Handpieces

Dental Lowspeed Handpieces

Straight handpieces are the most basic type of lowspeed handpiece. They consist of a straight, cylindrical handpiece that is typically used for finishing and polishing restorations. Straight handpieces are also useful for removing caries and preparing teeth for procedures.

 

Contra Angle Handpieces

Dental Lowspeed Handpieces

Contra-angle handpieces are more versatile than straight handpieces. They have a 90-degree angle between the shaft and the head, which allows them to access hard-to-reach areas of the mouth. Contra-angle handpieces can be used for a wide range of procedures, from preparing teeth for fillings to removing old fillings and preparing teeth for crowns.

 

Prophy Handpieces

Prophy handpieces are used specifically for polishing teeth. They have a short, angled head that is designed to hold a prophy cup, which is used to apply polishing paste to the teeth. Prophy handpieces are typically used after scaling and root planing procedures to remove any remaining stains from the teeth.

 

Uses of Dental Lowspeed Handpieces:

Lowspeed handpieces are used for a wide range of procedures in dental practices. Some of the most common uses of lowspeed handpieces include:

Removing caries: Lowspeed handpieces are used to remove decayed material from teeth. This process is often referred to as “drilling,” although modern handpieces are much quieter and less invasive than older models.

Preparing teeth for fillings: Before a filling can be placed, the tooth must be prepared. Lowspeed handpieces are used to remove any decayed material and shape the tooth so that the filling can be placed correctly.

Preparing teeth for crowns: Crowns are used to restore teeth that are severely damaged or decayed. Lowspeed handpieces are used to shape the tooth so that the crown can be placed correctly.

Polishing restorations: After a restoration has been placed, lowspeed handpieces are used to polish the restoration to ensure that it looks and feels natural.

Polishing teeth: Prophy handpieces are used to polish teeth and remove any stains that remain after scaling and root planing procedures.

Benefits of Lowspeed Handpieces

There are several benefits to using dental lowspeed handpieces in dental practice. Some of the most notable benefits include:

Increased precision: Low-speed handpieces provide precise control over the speed and movement of the instrument, which allows for greater precision and accuracy during dental procedures.

Reduced heat and vibration: Low-speed handpieces produce less heat and vibration than high-speed handpieces, which helps to reduce patient discomfort during procedures.

Versatility: Low-speed handpieces can be used for a wide range of dental procedures, from polishing and contouring to cutting and shaping.

Durability: Low-speed handpieces are typically made from high-quality materials and are designed to be long-lasting and durable, which helps to reduce the need for frequent replacements and repairs.

Improved patient outcomes: By using low-speed handpieces, dentists and dental hygienists can achieve better patient outcomes, with improved restoration aesthetics, reduced sensitivity, and increased longevity of dental restorations.

Choosing the Right Lowspeed Handpiece

When selecting dental lowspeed handpieces, there are several factors to consider, including the intended use, speed range, and compatibility with existing dental equipment. It is also important to consider the ergonomics of the instrument, as well as the maintenance and repair requirements.

Low-speed handpieces are an essential tool for any dental practice, providing precise control, reduced heat and vibration, and improved patient outcomes. With a range of types and features available, it is important to carefully consider the intended use and compatibility with existing equipment when selecting a low-speed handpiece. By choosing a high-quality, durable instrument, dental professionals can provide optimal care for their patients, with improved restoration aesthetics and increased longevity of dental restorations.

Dental Highspeed Handpieces

Dental highspeed handpieces are an essential tool in modern dentistry, allowing for precise and efficient tooth preparation for fillings, crowns, and other restorations. With the advancement of technology, highspeed handpieces have become increasingly sophisticated, offering greater power, precision, and versatility. In this blog post, we will explore the features and benefits of highspeed handpieces and how they are revolutionizing dental drilling.

What are dental highspeed handpieces?

These handpieces are dental drills that use compressed air or an electric motor to generate rotational power. They operate at a higher speed than traditional dental drills, typically ranging from 250,000 to 500,000 revolutions per minute (RPM). This higher speed allows for faster and more efficient tooth preparation, reducing the amount of time that patients spend in the dental chair.

Features of highspeed handpieces

Turbine System
Dental Highspeed Handpieces turbine
Spray Cooling
Dental Highspeed Handpieces water spray
Quick Bur Systems
Dental Highspeed Handpieces bur

These handpieces use a turbine system to generate rotational power. The turbine is powered by compressed air and is housed in the head of the handpiece.

Highspeed handpieces have spray cooling systems that cool the bur and the tooth’s surface during operation. This reduces the risk of overheating and damage to the tooth structure.

Most highspeed handpieces, nowadays, have a quick-release bur system that allows for easy and quick bur changes. This saves time and increases efficiency during procedures. 

Benefits of highspeed handpieces

  1. Faster and More Efficient: These handpieces operate at a higher speed than traditional dental drills, allowing for faster and more efficient tooth preparation. This reduces the amount of time that patients spend in the dental chair, which is beneficial for both patients and dental professionals.
  2. Precise and Accurate: These handpieces offer greater precision and accuracy during drilling, which reduces the risk of damage to healthy tooth structure. This is particularly important for cosmetic procedures, where accuracy and precision are critical for achieving the desired result.
  3. Versatile: These handpieces are versatile tools that can be used for a variety of procedures, including tooth preparation for fillings, crowns, and veneers, as well as for removing old restorations.
  4. Patient Comfort: These handpieces are designed to be more comfortable for patients, with a spray cooling system that reduces the risk of overheating and discomfort during drilling.
  5. Reduced Noise and Vibration: These handpieces generate less noise and vibration then traditional dental drills, improving patient comfort during the procedure.

Highspeed handpieces are a critical tool in modern dentistry, offering greater power, precision, and versatility than traditional dental drills. With their spray cooling system, lightweight and ergonomic design, and quick-release bur system, highspeed handpieces are designed for both patient comfort and dental professional efficiency. Although they are more expensive and require more maintenance than traditional dental drills, the benefits outweigh the disadvantages. 

 
Understanding Dental Handpiece Bearings and Their Maintenance

Understanding Dental Handpiece Bearings and Their Maintenance

Understanding dental handpiece bearings and their maintenance is critical to understanding your dental handpieces and how to make them last longer. Dental handpiece bearings are the heart of dental handpieces, they are critical components that play a vital role in their performance and longevity. In this blog, we will delve into the world of dental handpiece bearings, exploring their importance, types, common issues, and best practices for maintenance. Understanding these crucial elements will empower dental professionals to optimize their handpiece performance and ensure smooth operations. Without this knowledge of dental handpiece bearings, it is much more difficult for dental professionals to understand the maintenance needs and repair requirements of their handpieces.

 

Significance of Dental Handpiece Bearings

Dental handpiece bearings play a critical role in the proper functioning of the handpiece. They provide the necessary support and facilitate the rotation of the bur, allowing dentists to perform precise and controlled movements during various dental procedures. A well-maintained bearing ensures smooth and quiet operation, minimizing vibration and heat generation, which in turn improves patient comfort and enhances treatment outcomes.

 
Understanding Dental Handpiece Bearings and Their Maintenance

Types of Dental Handpiece Bearings

There are generally two types of dental handpiece bearings ceramic and steel.

  1. Ceramic Bearings: Ceramic bearings are known for their excellent performance and durability. They have a high resistance to heat and corrosion, reducing friction and extending the life of the bearing. Ceramic bearings also exhibit superior vibration-damping properties, resulting in smoother operation and reduced noise levels.
  2. Steel Bearings: Steel bearings are commonly used in dental handpieces. They are cost-effective and offer good performance when properly maintained. Regular cleaning, lubrication, and timely replacements are essential for steel bearings to maintain their optimal functionality.

Common Bearing Issues

Over time, dental handpiece bearings may encounter various issues that can affect their performance. Some common problems include:

  1. Wear and Tear: Continuous use can lead to wear and tear of the bearing components, resulting in decreased performance and increased friction. This can cause the handpiece to overheat and vibrate, compromising the precision and comfort of dental procedures.
  2. Contamination: Dental handpieces operate in an environment filled with saliva, blood, and other debris. If these contaminants enter the bearing assembly, they can cause corrosion, and blockages, and ultimately affect the smooth rotation of the handpiece.

Timely Replacement

Monitor the performance of the handpiece bearings and promptly replace them if there are signs of excessive wear, noise, or vibration. Timely replacement prevents further damage and maintains optimal performance.

Understanding dental handpiece bearings and implementing proper maintenance practices are vital for maximizing the lifespan and performance of these essential dental instruments. By regularly cleaning, lubricating, and monitoring the bearings, dental professionals can ensure smooth and precise operation during procedures, leading to improved patient comfort and better treatment outcomes. Remember to consult the manufacturer’s guidelines and seek professional assistance when necessary to maintain the integrity and functionality of dental handpiece bearings.

 
Back to Top
Product has been added to your cart